|
|
| |
|
|
| Question 1 |
|
Display is blank |
| |
|
|
| |
|
Check the polarity on your batteries to make sure they are installed according to the diagrams in the battery compartment. Also make sure that you are using a new good quality alkaline battery. |
| |
|
|
| Question 2 |
|
Change the way the date is displayed |
| |
|
|
| |
|
Press and release the + button to change your display options. |
| |
|
|
| Question 3 |
|
Time is incorrect or not displaying at all |
| |
|
|
| |
|
- If you have not yet installed the batteries or plugged in the clock and it shows a time, remove the scratch-guard from the LCD panel.
- This clock receives a signal from Ft. Collins, Colorado (WWVB) to set the clock to atomic time. Sometimes, due to adverse weather or atmospheric conditions you will not be able to receive a signal immediately. The best way to get a signal is to put your clock in a window facing Colorado until you see the tower icon appear.
- If your time is off by an increment of 1 hour, change your time zone to match your location.
|
| |
|
|
