Atomic Time - Digital Wall Clocks

513-149
Digital Atomic Wall Clock

$49.95

Buy Now
  • Atomic Time & Date
  • IN Temp
  • 12 / 24 Time
  • Time Alarm with Snooze

Dimensions:
Clock: 11" L x 1.1" W x 8.54" H
(280 x 28 x 217 mm)


Sensor: 2.5" L x 1.42" W x 3.98" H
(64 x 36 x 101 mm)

All Features:
  • Wireless outdoor temperature (°F or °C) with trend arrow
  • Monitors indoor temperature (°F or °C) with trend arrow
  • Atomic time and date with manual setting
  • Automatically updates for Daylight Saving Time (on/off option)
  • Time display (hour / minute)
  • Perpetual calendar (month / date / weekday)
  • Time zones: Time zones:
    • Atlantic Time (AST)
    • Eastern Time (EST)
    • Central Time (CST)
    • Mountain Time (MST)
    • Pacific Time (PST)
    • Alaskan Time (AKT)
    • Hawaiian Time (HAT)
  • Time alarm with snooze
  • Wall hanging or free standing
  • Low battery icon for clock and sensor

Specifications:

  • Wireless outdoor temperature range:
    -40 °F to 140 °F (-40°C to 60°C)
    • Alkaline Batteries:
      -20°F to 140°F (-28.8°C to 60°C)
    • Lithium Batteries:
      -40°F to 140°F (-40°C to 60°C)
    • Temperatures below - 20°F (-28.8°C) require Lithium batteries in the outdoor sensor.
  • 2 "AA" Alkaline batteries (not included)
  • Battery life 24 months
  • Indoor temperature range:
    +32°F to +122°F (0°C to 50°C)
  • 2 "AA" Alkaline batteries (not included)
  • Battery life 12 months

Documentation

Please verify the type of movement on your clock with the images below to get the correct documentation.


Click here for Manual   


FAQ

513-149

To function properly, the digital wall clock must be started correctly using good quality alkaline batteries and the time must be set.

     

Section 1 - Time Display

     
Question 1   Display is blank
     
   

Check the polarity on your batteries to make sure they are installed according to the diagrams in the battery compartment. Also make sure that you are using a new good quality alkaline battery.

     
Question 2   Time is incorrect or not displaying at all
     
   
  1. If you have not yet installed the batteries or plugged in the clock and it shows a time, remove the scratch-guard from the LCD panel.
  2. This clock receives a signal from Ft. Collins, Colorado (WWVB) to set the clock to atomic time. Sometimes, due to adverse weather or atmospheric conditions you will not be able to receive a signal immediately. The best way to get a signal is to put your clock in a window facing Colorado until you see the tower icon appear.
  3. If your time is off by an increment of 1 hour, change your time zone to match your location.