Atomic Time - Digital Wall Clocks

Discontinued

WS-8248U-AL
Atomic Digital Wall Clock

$69.95

  • 4" Tall Time Display
  • Atomic Time & Date
  • IN Temp (°F) & Humidity
  • OUT Temp (°F)
  • Moon Phase
  • Time Alarm with Snooze
  • 3 Languages:
    English, French, and Spanish

Dimensions:
Receiver: 11.75" x 12" x 1.25"
Sensor: 5.5" x 1.625" x 1"

All Features:
  • 4" high time display
  • Wireless outdoor temperature (°F)
  • Monitors indoor temperature (°F)
  • Moon phase
  • Atomic time and date with manual setting
  • Automatically updates for Daylight Saving Time (on/off option)
  • 12 hour time display
  • Perpetual calendar
  • Time zone setting
  • Time alarm with snooze
  • 3 languages to choose from: English, French, Spanish
  • Wall hanging or free standing
  • Swiss precision sensor

Specifications:

  • Indoor humidity range: 1% to 99%
  • Wireless outdoor temperature range: -21.8°F to 157.8 °F
  • Indoor temperature range: 14.1 °F to 99.8 °F
  • Temperature accuracy: +/- 1.5°F
  • LCD contrast setting: 0 to 7
  • Transmission range: Up to 330 feet
  • Transmission frequency: 433MHz
  • Swiss precision sensor
  • Power Requirements:
    Clock : 3 "AA" Alkaline batteries
    Wireless sensor: 2 "AA" Alkaline batteries

Documentation

Please verify the type of movement on your clock with the images below to get the correct documentation.


Click here for Manual   


FAQ

WS-8248

To function properly, the weather station must be started correctly using good quality alkaline batteries and the time must be set.

     

Section 1 - LCD

     
Question 1   The LCD is faint.
     
   

Replace the batteries

     

Section 2 - Time and Date

     
Question 1   No reception of WWVB time signal
     
   
  1. It may help reception to face the front of the clock in the general direction of Ft. Collins, Colorado.
  2. Wait until overnight for signal to be received
  3. Be sure indoor weather station is at least 6 feet from any other electrical devices such as televisions, computers, or other radio-controlled clocks.
  4. Remove the batteries for five minutes, reinsert and leave the unit alone overnight without pressing any buttons.
  5. If there is a consistent problem, please contact us via email at support@lacrossetechnology.com or by phone at
    608.782.1610
     
Question 2   Hour is incorrect (minute and date are correct)
     
   

Be sure correct time zone and daylight saving time is selected.

if there is a consistent problem, please contact us via email at support@lacrossetechnology.com or by phone at 608.782.1610

     

Section 3 - Temperature Information

     
Question 1   "OFL" appears in the indoor temperature section of the LCD
     
   

Move the clock to an area with warmer or cooler surrounding temperature. Current surrounding temperatures are outside measuring range.

     
Question 2   "--.-" appears in the outdoor temperature section of the LCD
     
   
  1. Remove the batteries of both units for one minute, then reinsert them again. Make sure the batteries are new and fresh.
  2. Move the radio controlled clock closer to the sensor or place the sensor closer to the clock. Make sure the clock is at a receivable range from the sensor.
  3. Move the units to another location. Interferences from other electrical devices operating on the same signal frequency (433MHz) may prevent correct signal transmission and reception.
     
Question 1   "OFL" appears in the outdoor temperature section of the LCD
     
   

Wait until the current surrounding temperature cools down or increases. Current temperature is outside of the measuring range of the sensor. The outdoor temperature will be displayed again once the current surrounding temperature is within the range of the sensor.