- Solar-Powered Wind Sensor
- Weather Resistant
- 0 to 111.8 mph with resolution of 0.22 mph
- 0 to 180 km/h with resolution of 0.36 km/h
- 0 to 12 bft
- 0 to 97.1 knots with resolution of 0.19 knots
- Transmission range: Up to 200 feet from Thermo-Hygro sensor
- Solar powered
- 11.11" L x 5.74" W x 9.84" H
"no contackt to my tx63U-IT windmill"
I just bought a new tx63u-it and i cant get it to get contackt to the 2811 weather station. Is it running trought the outdoor temperature and i have 3 off the all is working. (only using one at the time).
I have push the small butten inside and the button up on weather station. Please help.
- Hello Lasse, Please try the steps below:
-Cover the solar panel of the Wind sensor for 15 seconds so no light reaches the solar panel. Then gently press the reset button on the bottom of the Wind sensor. This should assure the wind sensor is turned off.
-Remove the batteries from the Thermohygro and Rain sensors for 2 minutes. Replace the batteries in the Rain and Thermohygro sensors.
-Gently press the reset button on the bottom of the Wind sensor, with the solar panel exposed to light.
-After 3 minutes press and hold the UP ARROW on the display until it beeps. Wait 10 minutes. If you do not receive a reading from all your sensors, please try the factory reset below.
If this does not resolve the issue please contact us for support.
La Crosse Technology
"Works great, till...."
I had my station for a long time, but my batteries died on my tx63u-it and there's no way to replace them, seems like a major design flaw.